Hosco Japan H-SCR-5

Hosco wide scrapers are developed in collarboration with a famous Japanese classical guitar builder. The scrapers are made this wide so they cover the sides of a guitar in one go.There are two scrapers in this set.Straight shape: 120x44mm, Thickness: 0.4 mmCurved shape: 120x44mm, Thickness: 0.4 mm

High quality diamond grit file for crowning frets after levelling. Three sided for narrow, medium and wide frets. The narrow part is narrow enough for mandolin frets, the wide part is wide enough for jumbo frets. Crown file for small (R=1mm), medium (R=2mm) or wide frets (R=3mm) frets.The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.

Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.

Carbon steel fretpuller with flattened blade. Not suitable for cutting frets, but perfect for pulling frets.For cutting frets please use H-FC190 or H-FC28SS.Blade width 10,0 mmBlade thickness: 0.4 mmLength: 150 mm

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

The workbench mat is made of 5mm PE foam with a PVC cover. non-slip PVC at the backside.The 6 cm/2,25" width of the front edge is able to fold down at the edge of the bench to secure the mat and provide more comfort to you. In the two upper corners we have added magnet into the mat. This will help to keep small screws, nuts, small hardware in place.This is the ideal mat for every luthier!Size: 120 cm x 50 cm

Radius 10" /254 mm and 12" / 305 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.

Radius 14" /356 mm and 16" / 406 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.